I am building my new PC, specs are:
x570 TUF Gaming Plus WIFI
R9 5900X
EVGA 3080 FTW3 ULTRA
16GB DDR4 3600Mhz
750W EVGA BQ
-------------------------
I had everything put together and was in the bios, and right before restarting the computer I switched the DOCP protocol from none to 1, which set my ram from 2666Mhz (I think) to the 3600Mhz it's rated for. I then inserted my windows 10 image flash drive, and turned the computer off. When I restarted it, there is no display and the light that usually is green on my motherboard is a solid amber. I have tried removing everything except CPU and RAM and PSU, and still nothing has changed.
Thanks for any help!
x570 TUF Gaming Plus WIFI
R9 5900X
EVGA 3080 FTW3 ULTRA
16GB DDR4 3600Mhz
750W EVGA BQ
-------------------------
I had everything put together and was in the bios, and right before restarting the computer I switched the DOCP protocol from none to 1, which set my ram from 2666Mhz (I think) to the 3600Mhz it's rated for. I then inserted my windows 10 image flash drive, and turned the computer off. When I restarted it, there is no display and the light that usually is green on my motherboard is a solid amber. I have tried removing everything except CPU and RAM and PSU, and still nothing has changed.
Thanks for any help!