Tech Support Forum banner

wireless router won't read ISP

1525 Views 4 Replies 2 Participants Last post by  elicook
I have an ARESCOM NetDSL1000 and a Linksys WRT54G wireless router. I had the router configured and everything working fine. Suddenly the modem stopped working and my ISP provider sent someone to reconfigure the modem. Since then I can't get the router to read the ISP from my modem. I tried the router on another modem and it worked immediately, so I know it's not the problem.

Any suggestions?

Not open for further replies.
1 - 2 of 5 Posts
Can you connect directly to the modem and get a connection? Remember, you have to power cycle the modem whenever you changed the attached device.

If that works, please do this when connected to the modem.

For 98 or ME, Start, Run, COMMAND to open a DOS window:
--- or ---
For 2K or XP, Start, Run, CMD to open a DOS window:

Type the following command:


Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.
See less See more
1 - 2 of 5 Posts
Not open for further replies.