[gatmat]

Ok going 2 sound really bad here -.-

i have my Belkin wireless router setup connected to the internet which is running fine my laptop is connected via a Belkin wireless card which again is working fine.
I have just updated another computer of mine which was also connected via its built in wireless card to the internet. After the updates was complete i wanted to reconnect to the internet via the Built in card but all i can do is connect to the router but it will not allow me to use the internet just says page cannot be displayed.

Any Help on how to set it up again to access the net?? :normal:

Thanks

 

[CTSNKY]

Do you have any kind of MAC filter set up on your router?

There's a good tool which resets networking protocols to try called WinsockXPFix:

http://majorgeeks.com/WinSock_XP_Fix_d4372.html

 

[gatmat]

Do you have any kind of MAC filter set up on your router?

There's a good tool which resets networking protocols to try called WinsockXPFix:

http://majorgeeks.com/WinSock_XP_Fix_d4372.html

Hey, no i currently have mac address filter disabled

 

[CTSNKY]

Did the tool work for you?

Have you power cycled all the equipment?

 

[gatmat]

Hey thanks for the replys i managed to get it set up and running in the end, its ip was being used by another system so just renewed its ip then bingo simple i know

thanks again.