Tech Support Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I have an athlon 2000+ on a biostar M7VIQ motherboard. At first it would only see the processor as 1.25ghz. I changed the cpu frequency to 133 mhz from 100mhz and the processor was then recognised properly. Only problem is that i have to reset the bios every time i start up. It starts to boot and loads the default bios settings. I can continue into windows but once i restart, i have to reset the bios or i just get a blank screen. The ram is pc2100 256mb.

Any help would be appreciated.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Status
Not open for further replies.
Top