Tech Support banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter #1 (Edited)
Hello everyone,

Quick question here. I keep getting a message upon trying to start Windows that states that I need to select the proper boot device. I am trying to install 2 Samsung SP0812 hard drisks in RAID 0. I installed the Nvidia Raid controller and have already created the array via the bios-type menu.
Now, I went back into the bios screen and I cannot figure out for the life of me what it is asking. I'm not familiar with this board or with SATA drives.
Could I have connected to the wrong SATA connectors? I connected to the ones at the bottom of this board that are labeled "Raid", as opposed to the ones in the middle of the board labeled "Sata". I'm not sure but I would love to get this thing up and running soon.
All help is appreciated, thanks in advance :grin:


Asus K8N-E Deluxe mobo
ATI Radeon 9800 Pro 128
Soundblaster Audigy 2
Antec Truepower 430W
2 X OCZ EL Platinum 512MB PC3200 @ 400mhz
2 X Samsung 80GB Serial ATA HD (Raid 0)
ThermalTake Tsunami Dream
Pioneer CD R/DVD R +/- combo drive
 

·
Registered
Joined
·
7,747 Posts
This board has 2 SATA controllers. The nVidia nForce 3 which is integrated in the southbridge and a Silicon Image Sil3114 controller. Both can be configured for RAID. The ports on the bottom are for the Sil3114 controller and the ports in the middle are for the nVidia controller. Even though the nVidia ports are not labled as 'RAID' they can be configured as a RAID array.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top