Tech Support Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
1,039 Posts
Hi wmorri, if you really want to get a solid overclock from a socket A processor, you'll need another motherboard. In my experience Via chipset boards have performed very poorly at OC'ing and which cpu you use just doesn't matter. The Nforce 2 Ultra 400 boards are the best boards to run a multiplier locked Athlon cpu. There are pencil mods and wire mods to attempt to unlock these processors, but when those fail and if you haven't already done some damage to the cpu, you are stuck with increasing the front side bus and cpu-memory voltages. If your board allows you to raise the FSB, that is where to start. Mike
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top