Because i want to ask about last thing. My last topic was locked so i dont finish my last question. I will be very greatful last time for answer.
So just before my last format ,when i change boot priority in bios from USB to SDD ( after memtest86 test ) i was getting Automatic Repair and diagnosing pc during 1 boot of Windows 10.
Then after this i get screen with Your pc did not start correctly or Automatic Repair couldnt repair your pc . And when i click
RESTART then Windows 10 boot fine.
or
This startup problem was occured only when starting system again after shutdown or restarted pc from windows.So i was needed 2 boots to boot properly to windows. After screen with Your pc did not start correctly or Automatic Repair couldnt repair your pc i click
restart i was able to boot Windows 10 properly.
You said that was not hardware related but software.
I ask because i was little worried because i read here that reasons can be :
https://neosmart.net/wiki/startup-repair-infinite-loop/
Causes of this error
This error has been known to occur as a result of one or more of the following:
Cause #1: Damaged or corrupted BCD settings
Bootsector viruses and other malware that targets the bootloader or the booting chain can cause errors in the bootloader settings and state that result in an infinite loop of Startup Repair.
The virus may then block Startup Repair from either launching or carrying out its repairs successfully. A failed Windows Update or Automatic Update can also sometimes leave the Boot Configuration Data (BCD) in an inconsistent or non-working state.
Cause #2: Corrupted boot partition
On Windows 7 and above, Windows by default creates a separate 100 MiB NTFS partition at the start of the drive, reserved for core bootloader files and BCD configuration.
An unsafe shutdown, sudden power loss, hard disk failure, or a blue screen of death during writes to the boot partition can leave your system in an inconsistent state, unable to boot and infinitely cycling into the Startup Repair.
I was worried when i read this on that site:"An unsafe shutdown, sudden power loss, hard disk failure"
What you think then ?
thx
