[ZM1905]

Hi guys. Friend has 2pcs of Tenda F3 routers. He use this only as access points. At least till now. From some reason he reseted them to factory defaults. Now, there's no option for AP mode?? Please see screen shoot from manual

https://files.tendacn.com/userfiles/WordToHtml/Internet%20Setup/(Tenda)F3-How%20to%20setup%20AP%20mode.files/image002.png

There's option for AP mode. But, if you see attached screen shot from his case, there's no AP Mode!? Does anyone know how to enable it? Thank you in adavce!

 

[Fred Garvin]

I'm not familiar with that router, but all you need to do to turn it into an access point is change the LAN address of the router to a static LAN address and turn DHCP OFF. That turns your router into a switch or access point.

 

[spunk.funk]

It's all in their manual Lan Settings - Tenda F3 User Manual [Page 37]

 

[ZM1905]

I'm not familiar with that router, but all you need to do to turn it into an access point is change the LAN address of the router to a static LAN address and turn DHCP OFF. That turns your router into a switch or access point.

Yes, that makes sense.
Thank you for your useful answer.

 

[Fred Garvin]

You're welcome.