Tech Support Forum banner

Strange display issue with new RAM?

1K views 2 replies 3 participants last post by  xrobwx71 
#1 ·
Hi,

I have the MSI H110M PRO-VD PLUS motherboard,

I have just upgraded the RAM to 2x Corsair Vengeance LPX DDR4 XMP 2.0 RAM 2400 MHz. 2 x 16GB

According to the motherboard specs this should be viable (right?)

When I boot with 1x 16gb it boots fine, but when I try with 2x16g the pc powers on but I cannot get any display.

I have checked both sticks in both slots individually, I also tried going back to the original 2x4gb sticks and this boots fine. Based on that it cannot be a faulty stick or faulty slot (right?)

I have tried changing my BIOS to the relevant voltage and MHz and then back to auto which it was originally on, but for some reason it just won't boot with both sticks of the new RAM in.

Am I missing something?

Thank you in advance
 
See less See more
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top