Tech Support Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts

·
Registered
Joined
·
5,740 Posts
I hate to bring this up again, and I agree the case looks cool. I'd love
that case, "if" the psu were on the top where it should be.
Ive built 2 machines using that case, and I warned the owner of the
problem, but to no avail.
With the psu being at the bottom of the case, its a heater for the
video card/s. The vid card is right above the psu, and that 1000watt
psu puts out plenty of heat. Just something to consider...
 

·
Emeritus
Joined
·
51,675 Posts
The Mobo is a little overkill.
I would recomend going with WD for the Hdd. Seagate/Maxtor have had some problems lately.
I've had no heating problems with any of the bottom mount PSU cases that I've used. If the PSU has a bottom mount fan, like the one you've chosen, I simply mount the PSU upside down so the fan is on top drawing air out of the case.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top