Tech Support Forum banner
Status
Not open for further replies.
1 - 12 of 12 Posts

· Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Hello! I am new to these forums.

I ran CHKDSK to repair disc, it asked me to restart I said yes. It got to 28 percent and was stuck so I pulled the plug. :facepalm::facepalm::facepalm: I tried to boot into Windows and it would try to check and repair disk errors again. I turned the pc off and pressed shift F8 to get into safe mode. After windows logo it would hang at Black screen across both monitors. I tried to boot normally and it did not chkdsk it just booted to the black screen. I cannot get to safe mode, I have tried all options in the shift F8 screen with no avail.:banghead:

Please Help!!!

Bruce Russell Jr.

My pc:

Ga-x68x-ud3h-b3

2500k stock cooler/ speed

4 gig ram

Hd 3000 intel graphics
 

· Global Moderator
Using Google to solve problems
Joined
·
44,966 Posts
Re: Windows 8 Black Screen after Boot

On another computer, download the ISO image for Seatools in my signature. Burn the image to CD using IMGBurn also in my signature. Boot off of the newly created CD and run the Short and Long tests on the drive.
 

· Global Moderator
Using Google to solve problems
Joined
·
44,966 Posts
Re: Windows 8 Black Screen after Boot

You will boot from the CD and run the Seatools HDD diagnostics to test the HDD. This may solve the problem, but if either test fails the HDD needs to be replaced.
 

· Registered
Joined
·
5 Posts
Discussion Starter · #7 ·
Re: Windows 8 Black Screen after Boot

The seatools just boots to say invalid opcode and does not go to GUI. I have tried ubcd and it also gives me problem.
 

· Global Moderator
Using Google to solve problems
Joined
·
44,966 Posts
Re: Windows 8 Black Screen after Boot

This is an indication that the HDD is failing or has failed. You can also try downloading Drive Fitness ISO from my signature and burning it to CD with IMGBurn and see if that works.
 

· Registered
Joined
·
5 Posts
Discussion Starter · #9 ·
Re: Windows 8 Black Screen after Boot

This is an indication that the HDD is failing or has failed. You can also try downloading Drive Fitness ISO from my signature and burning it to CD with IMGBurn and see if that works.
I just reinstalled Windows, ran into an activation problem that made me have to downgrade to Vista then Upgrade to 8.:whistling::grin::wink::smile:
 

· Global Moderator
Using Google to solve problems
Joined
·
44,966 Posts
Re: Windows 8 Black Screen after Boot

Glad to see you got it going. Please mark this thread Solved in the Thread Tools at the top.
 

Attachments

1 - 12 of 12 Posts
Status
Not open for further replies.
Top