Tech Support Forum banner
Status
Not open for further replies.
1 - 8 of 8 Posts

·
Registered
Joined
·
46 Posts
Discussion Starter · #1 ·
This is the report that the wizard show to me please help me if you know anything that can cause this

Backup Status
Operation: Backup
Active backup destination: LTO Ultrium
Media name: "SSL001 Wed-04-13-2011"

Volume shadow copy creation: Attempt 1.
Backup (via shadow copy) of "C: "
Backup set #1 on media #1
Backup description: "SSL001 Wed-04-13-2011"
Media name: "SSL001 Wed-04-13-2011"

Backup Type: Normal
Backup started on 4/13/2011 at 2:13 AM.
Backup completed on 4/13/2011 at 2:19 AM.
Directories: 1853
Files: 15242
Bytes: 323,883,691
Time: 5 minutes and 48 seconds
Backup (via shadow copy) of "D: Data"
Backup set #2 on media #1
Backup description: "SSL001 Wed-04-13-2011"
Media name: "SSL001 Wed-04-13-2011"

Backup Type: Normal
Backup started on 4/13/2011 at 2:19 AM.
Backup completed on 4/13/2011 at 8:42 AM.
Directories: 12224
Files: 200252
Bytes: 198,735,241,462
Time: 6 hours, 22 minutes, and 57 seconds
Backup of "DCSPYRIDONOS\Microsoft Information Store\First Storage Group"
Backup set #3 on media #1
Backup description: "SSL001 Wed-04-13-2011"
Media name: "SSL001 Wed-04-13-2011"

Backup Type: Normal
Backup started on 4/13/2011 at 8:42 AM.
The requested media failed to mount. The operation was aborted.
The operation was ended.
Backup completed on 4/13/2011 at 9:48 AM.
Directories: 0
Files: 2
Bytes: 40,538,994,402
Time: 1 hour, 5 minutes, and 53 seconds

----------------------
The operation did not successfully complete.
----------------------
 

·
Registered
Joined
·
1,016 Posts
Re: unable to backup data

So far you have managed to successfully backup from two drive letters.
I assume that the third one is to backup of a database?

Do you have enough storage space on the backup destination? It seems like it was doing the right job until it reached that limitation.
 

·
TSF Emeritus
Joined
·
16,395 Posts
Re: unable to backup data

I will bet that 400GB is with compression which means 200GB native. You never ever get the 2:1 compression assumed with the 400GB.

It says on the tape 200/400GB right?

might try using the hardware compression switch in ntbackup [/hc:eek:n]

You exceeded the space on the tape which I believe is why the backup failed.
Split your backup so the 3rd drive goes to a different tape
 
1 - 8 of 8 Posts
Status
Not open for further replies.
Top