Joined
·
15 Posts
I have just built a new comp
ECS 945GCT-M3 (3.0A) 775 Mobo
SL8HX 2.8\1MB\800 Chip
Kingston PC2-5300 667 Ram
370w 24pin PSU
The problem is when i first started it up the fans come on but no display (tested on 2 different screens) its an onboard graphics. i tryed to clear cmos didint work i had the same problem a while back with a totaly different setup and it was the chip. i hope this isn't the case. i will be grateful for any suggestions
Thanks
Adam
ECS 945GCT-M3 (3.0A) 775 Mobo
SL8HX 2.8\1MB\800 Chip
Kingston PC2-5300 667 Ram
370w 24pin PSU
The problem is when i first started it up the fans come on but no display (tested on 2 different screens) its an onboard graphics. i tryed to clear cmos didint work i had the same problem a while back with a totaly different setup and it was the chip. i hope this isn't the case. i will be grateful for any suggestions
Thanks
Adam