Tech Support Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
My John Deere LA 105 runs like a champ. After sitting it out for 5 months through the winter, I decided to put new blades on it before I started mowing again. After replacing the blades I had to charge the battery and then it fired up just fine. I can ride it around with no problems, but when I lpush the PTO lever up to engage the blades nothing happens. It worked fine when I parked it. Could I have jerked something loose somewhere when I changed the blades out?
Any suggestions would be appreciated.
 

·
Registered
Joined
·
14,580 Posts
Re: John Deere LA 105 PTO wont engage

Hi and welcome to TSF :wave:

Any chance that you put the belt(s) on wrong ? Sounds like it to me.

BG
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
Re: John Deere LA 105 PTO wont engage

Never removed the belt, but after checking it out that was in fact the problem, the belt was apparently jerked loose from removing the blades and was soo loose with the PTO disengaged that it had fallen off one of the pully's. tightened it up and it works great now. Thanks!!
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top