Tech Support banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Hi, I've been Having Problems with my computer/Internet, i formatted my computer then i had to re-install my BlueYonder Broadband using the cd so i did but the cd seems to stop at a point

first it was stopping at this point



then it started to stop at a point where it said Veriying to see that your Clock is set to the right time when it already is but still no internet, then i tried going on safe mode using Network and my internet works but thats confusing

my net works on safe mode but not on normal mode

can anyone please help me with this problem?
 

·
Citizen of the world
Joined
·
51,041 Posts
Re: I'm Very Confused

When booted in normal mode, and again in safe mode, please do this:

Start, Run, CMD to open a command prompt:

Type the following command:

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
 

·
Citizen of the world
Joined
·
51,041 Posts
Re: I'm Very Confused

What happens if you use SAMBA to try to copy files? With TFTP, do you get a directory list? What are the exact symptoms of the failure?
 

·
Registered
Joined
·
6 Posts
Discussion Starter #4
Re: I'm Very Confused

sorry about the late reply

heres what the message shows

(wildcard characters * and ? allowed, see examples)

Options:
/? Display this help message
/all Display full configuration information.
/release Release the IP address for the specified adapter.
/renew Renew the IP address for the specified adapter.
/flushdns Purges the DNS Resolver cache.
/registerdns Refreshes all DHCP leases and re-registers DNS names
/displaydns Display the contents of the DNS Resolver Cache.
/showclassid Displays all the dhcp class IDs allowed for adapter.
/setclassid Modifies the dhcp class id.

The default is to display only the IP address, subnet mask and
default gateway for each adapter bound to TCP/IP.

For Release and Renew, if no adapter name is specified, then the IP address
leases for all adapters bound to TCP/IP will be released or renewed.

For Setclassid, if no ClassId is specified, then the ClassId is removed.

Examples:
> ipconfig ... Show information.
> ipconfig /all ... Show detailed information
> ipconfig /renew ... renew all adapters
> ipconfig /renew EL* ... renew any connection that has its
name starting with EL
> ipconfig /release *Con* ... release all matching connections,
eg. "Local Area Connection 1" or
"Local Area Connection 2"

C:\Documents and Settings\Administrator>
 

·
Citizen of the world
Joined
·
51,041 Posts
Re: I'm Very Confused

Now try IPCONFIG /ALL in the proper format. Note that this is ONLY a space before the /, and nowhere else.
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top