Tech Support Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I have a 99 F150 that had a problem with the turn signals. When I removed the multi function switch all the wires pulled out of the plug and I can't find a diagram to show me where they go. there are 7 wires...any help would be appreciated.
 

·
Registered
Joined
·
560 Posts
Re: F 150 multi function switch wiring

I know the libraries have complete wiring diagrams on their computers and you can print them out for about $.20 cents a sheet
back when i had my shop and before i got All-Data i would have to go to the library to get info at times

ones of the guys here might know a web site you can go to
 
G

·
The link above saved the day for me. Thank you for posting it. I have a 2000 F-150 and it was exactly what I needed to connect the wires which had all pulled out because the the steering tilt. I also cut the tape holding the wires immediately behind the connector so I could pull up some slack and hopefully avoid them pulling out again.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top