[SOLVED] BSOD 8e error

Re: BSOD 8e error

what
cpu
video card
m/b
power supply
brand
wattage
turn the auto reboot off and post the bsod error message in full
control panel/sysytem/advanced/startup and recovery settings
and untick the auto reboot box
did you run memtest on 1 stick at a time

Re: BSOD 8e error

PC specs.....
MB ASUS P5N32-SLI
CPU Q6700
MEM 4-OCZ 1mb Vista upgrade (2 matched sets)\
P/S Antec 550watt
Vid 2 8600GTX in SLI
Antec P180 case
Dual boot XP on 2 SATA 320 raid 0 and Vista Ultimate 64 on 2 SATA 500 raid 0

I ran memtest on each pair, not each stick and I ran it in both slot pairs.

I did set to stop on BSOD but the only unique information on it is the error codes posted. There is no other information about the error (strange?)

windbg talks about date stamp on filtmgr.sys. It's different than other XP systems but I understand it can be depending on drivers and the like.

Re: BSOD 8e error

took some finding this is for a single card
Specifications

Performance
NVIDIA GeForce 8800 GTX
575 MHz GPU
128 Pixel Pipelines
400 MHz RAMDAC

Memory
768 MB, 384 bit DDR3
1800 MHz (effective)
84.4 GB/s Memory Bandwidth

Interface
PCI-E 16X
DVI-I, DVI-I, HDTV
SLI Capable

Resolution & Refresh
240 Hz Max Refresh Rate
2048 x 1536 x 32bit x85Hz Max Analog
2560 x 1600 Max Digital

Requirements
Minimum of a 450 Watt power supply.
(Minimum recommended power supply with +12 Volt current rating of 28 Amp Amps.)
you look to be well underpowered
sometimes 8e is video drivers while your waiting for the error to come up reinstall them
in the device manager uninstall the card
reboot tapping f8 and choose vga mode
when windows finishes rebooting
disable a/virus
install your drivers
reboot the computer