Tech Support banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter #1
I have recently installed a Ricoh IS430+ scanner on my PC (running on Windows 98, connected using a SCSI card) but despite trying several differnt drivers I cannot get it to do anything but flash at me as though its jammed. I have been inside & am sure it isn't jammed. Doesnt anyone have any suggestions???
 
S

·
Guest
Joined
·
0 Posts
Welcome to the forums BELITD.......:D

Check to see if it has a lock switch to be used when transporting.
 

·
Registered
Joined
·
35 Posts
Discussion Starter #3
Well thanks for the suggestion but that doesnt seem to be it, I will have a more thourough look later though & if it works i'll let you know!
 

·
Registered
Joined
·
35 Posts
Discussion Starter #4
Its OK you can forget about this one now, its working again somehow! all i did was restart & the lights stopped flashing but my scanning program was saying there was a problem with the SCSI, so i removed it, restarted the PC & Windows picked it up, then it was working fine!
Cheers anyway!
 

·
Registered
Joined
·
1,481 Posts
and you learned a great troubleshooting lesson that most of us live by....

If it dont work...undo and redo the steps and for some reason things...work...this has probley solved MORE problems for more tech...then ANYTHING else

Y...i dont know it liked the attention:angel:
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top