Tech Support banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
256 Posts
Discussion Starter · #1 ·
Intel Celeron 366Mhz or 400Mhz O/C'ing.

I visited the o/c'ers site and the CPU database had o'c avg speeds for the 366mhz, which was 669mhz. But they didn't have any avg o/c speeds for the 400mhz. If someone can correct me or confirm that the 400mhz is unclockable? I'm thinking of getting the 366mhz or the 400mhz for o/c purposes. So any advise on the two choices are appreciated.

I already have an Allied 300watt PS, a 300Amhz Celeron o/c'd to 450mHz cooled by a Alpha1HO heatsink, equipped with two Vantec Stealth 60mm fans, and the case is ventilated with two Coolermaster 120mm fans, one going in from the front through a hard drive and the other going out to the back near the CPU, in a linear horizontal direction.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top