Tech Support banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
hi,

I have configured my XP with screen's resolution to 1280x1024 32bits 85Hz.

BUT when I reboot my PC, XP goes automatically to a lower resolution (640x480).

This problem was happened after the installation of drivers Catalyst 3.5 and still opened today

I have made somes actions below with no result:

- go to my displays screen and monitor to select 1280x1024
- format my DD and re-install all my system

any ideas ??

Thanks

my system:
Microsoft Windows XP Professionnel (Service pack 1 + all updates)
Asus P4C800 Deluxe (Bios 1007)
INTEL Pentium 4 2.8C (2,8Ghz, 800Hz FSB)
1Go PC3200 DDR SDRAM (?)
Hercules Radeon 9700 Pro 128MB (Drivers ATI Radeon Catalyst 3.6 + Direct X 9.0b)
Adaptec SCSI (29160N)
Alim 350 Watt
2x 30GB IBM HD SCSI
Drive SCSI DVD Pioneer A-05
Graver SCSI CDR TRAXDATA (CDRW4260 Pro, Rev. q)
 

·
Registered
Joined
·
336 Posts
you might try lowering the refresh rate to see if it still happens.

or...

Delete all drivers with this and then reinstall the new driver. (make sure you delete any nvidia drivers too).
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top