Tech Support Forum banner

realtek rtl8139D (IN100 model) schematic

3747 Views 1 Reply 2 Participants Last post by  johnwill
Hi!
I noticed you guys solve a lot of problems related to realtek.
I'm building a TCP/IP stack for an AVR microcontroller. I want to use this type of networks card (realtek with RTL8139D chip, one 9xxxx EEPROM and onboard magnetics) for the output. Basically, the AVR thinks, and this card will do.

I need to know the relationship between the RTL8139D pins and the PCI pins. What the driver does is to interface directly the chip.

Some of them are directly visible, but considering the chip is a TQFP with over a hunderd pins, it will be a real pain to manually trace them (not to mention those going through several vias)

Thanks!
Status
Not open for further replies.
1 - 2 of 2 Posts
Why not go to the Realtek site and get the specifications for their support chips?
1 - 2 of 2 Posts
Status
Not open for further replies.
Top