Tech Support Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

· Registered
Joined
·
668 Posts
Hi, Copy the Win98 folder from the CD to your Boot Drive (Folder and all). Drag and Drop is the easy way to do it. To reinstall from Windows or DOS go to the new Win98 folder and run SETUP. There is a lot more on the disk, but this is usually all you need.

Re your first post. ATX board will not fit into an AT Case. There were some combination AT/ATX boards that will, but I have not seen any for years. ATX case has lots of ports grouped near a Keyboard and Mouse port at the upped part of the panel at the rear of the case.

Good Luck, Jim
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top