Tech Support Forum banner
Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 · (Edited)

·
Enthusiast
Joined
·
16,762 Posts
If the ram is compatible with the board it should automatically detect the speed and set it up correctly. However the odd board (normal Asus boards) default to a certain speed and you have to change this manually.

If you have to change it yourself it is very very simple. All you do is after installing the ram and switch the computer on you go into the BIOS and find a setting called DRAM speed, you press enter on this and select the speed your ram is supposed to be then you save and exit.

Although I doubt you will have to do that since you are getting a Gigabyte board. It will actually tell you in the motherboard manual if this is required.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top