Tech Support banner

Status
Not open for further replies.
1 - 10 of 10 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
Hi Guys need some help please

my friend has a foxconn p4m800p7mb and has just got two 1gig ram cards
if you put them in one at a time they work, if you put them in slot one or two

but if you put them in together the pc will not boot

could there be a fault with the mb
 

·
Registered
Joined
·
74 Posts
It could be the fault of the motherboard (RAM SLOTS) I had a problem like this> one of the slots was not working but the other one was working.
My pc was resetting all the time if I use both of the slots. and it failed a MEMTEST86 as well with a lot of errors.

Try a http://www.memtest.org/
 

·
Registered
Joined
·
7 Posts
Discussion Starter #3
i can use any of the slots sepritly it is onle when i try and use both slots that the pc will not boot
 

·
Registered
Joined
·
74 Posts
what is your system specs??? CPU, PSU, RAM,Graphics.... maybe they are just not compatible with each other
 

·
Registered
Joined
·
74 Posts
and If you have time test each one of them on http://www.memtest.org/ maybe one of them is faulty or with some errors .

ch33rS
 

·
Registered
Joined
·
7 Posts
Discussion Starter #7
they have just been bought and are from the same manufacturer and the same spec
ddr2 533
 

·
Registered
Joined
·
74 Posts
hmm probably it's the motherboard then. it could not handle both of the rams at the same time, the problem is the one of the slots I think ...
 
1 - 10 of 10 Posts
Status
Not open for further replies.
Top