Tech Support Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I cannot get my Epson R2400 up and running. Had been running and just stopped unexpectedly. I use have tried everything. Top 2 lights blinking red (not fast) and green power light is off - this is supposed to indicate some sort of a jam, but the printer is not jammed with paper or anything else. Print head is far right in locked position. I am runing a CIS system and third party inks. Have tried reset proceedure recommended in the SSC utility manual (turn off printer, unplug for a minute; turn on power, press and hold power, ink and paper buttons for 12 seconds). No good. When I try using SSC utility I get message;"printer off, or some other problem." My computer (windows xp) recognizes my r1400 and I can print with that printer. I wonder if anyone else has experienced a similar situation? I am stymied and frustrated and welcom any suggestions. Thanks.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top