Tech Support banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
i have a dlink DI-624 router, so that i can use xbox live (with a wireless reciever connected) in another part of the house. when i first installed it i had no problems but suddenly i cant seem to get it to work, on the network connections screen it says that it cannot identify the problem! the link between my computer and the network has an ! mark on it and it will not allow me to connect to the internet either. when i input the address 192.168.0.1 it will not recognize the router! when the pc is directly connected via the ethernet cable i dont have any problems connecting to the net,any ideas? input would be much appreciated.
 

·
Registered
Joined
·
6 Posts
Discussion Starter #3 (Edited)
Sounds like you need to reconfigure the wireless settings on the router.
Thanks for the intrest, ive been trying to access the wireless settings but when i put in the address 192.168.0.1 into the browser (which is the address for the dlink router) it says it cannot display the page, when i do this the modem is connected to the wan port and the PC is connected to port 1 of the router!! is there another way of accessing the settings or have i the network setup improperly? Much appreciated.
 

·
Citizen of the world
Joined
·
51,042 Posts
I suggest starting from scratch and getting a wired connection working.

Reset the router to factory defaults by holding the reset button down for 15 seconds with power on.

  • Turn off everything, the modem, router, computer.
  • Connect the modem to the router's WAN/Internet port.
  • Connect the computer to one of the router's LAN/Network ports.
  • Turn on the modem, wait for a steady connect light.
  • Turn on the router, wait for two minutes.
  • Boot the computer.

When the computer is completely booted, let's see this.

Hold the Windows key and press R, then type CMD to open a command prompt:

In the command prompt window that opens, type type the following command:

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
 

·
Registered
Joined
·
6 Posts
Discussion Starter #5
Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\Hackett>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Hacketts
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast Ethernet
NIC
Physical Address. . . . . . . . . : 00-1A-92-68-CA-77
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 6:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 02-00-54-55-4E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 7:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.{6912D374-63F6-42EC-BE5A-0F853F1CD
FC7}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

C:\Users\Hackett>


thanks for the reply again, hopefully this helps you help me!!!!
 

·
Citizen of the world
Joined
·
51,042 Posts
Well, you show no connections there. If you followed the instructions completely, something is likely broken, since the wired connection is not connected to anything.
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top