I have an SMC7004VWBR and can't seem to get an IP address from my provider, my DHCP server, etc. Everything about it seems to work, it gives out IP addresses when equipment requests, I can get into the gui interface and change setting, etc. I tried resetting back to factory setting as well as updating the firmware. Nothing seems to make this thing actually get an address. I know there's nothing wrong with my provider or my network since everything works on it except this router. I keep getting this error msg when I try to renew:
Security log:
Thu Jan 01 00:07:28 1970 : Get Dns[0] = 192.168.2.1
Thu Jan 01 00:07:28 1970 : Get Gateway[0] = 192.168.2.1
Thu Jan 01 00:07:27 1970 : Get Netmask = 255.255.255.0
Thu Jan 01 00:07:27 1970 : Get Ip = 192.168.2.117
Thu Jan 01 00:07:27 1970 : Dhcp client renew
Thu Jan 01 00:07:26 1970 : DHCP Client : Receive Ack from 192.168.2.1, Lease time = 1209600
Thu Jan 01 00:07:26 1970 : DHCP Client : Send Request, Request IP = 192.168.2.117
Thu Jan 01 00:07:23 1970 : DHCP Client : Receive Offer from 192.168.2.1
Thu Jan 01 00:07:23 1970 : DHCP Client : Send Discover
Thu Jan 01 00:07:23 1970 : Dhcp client lease invalid.
Thu Jan 01 00:07:23 1970 : DHCP Client : Send Decline
Thu Jan 01 00:07:22 1970 : DHCP Client : Receive Ack from 192.168.2.1, Lease time = 1209600
Thu Jan 01 00:07:22 1970 : DHCP Client : Send Request, Request IP = 192.168.2.117
I've tried to change the lease length but no dice. I'm pretty experienced with this type of equipment but I can't for the life of me figure out what may be the problem. Any help would be greatly appreciated. I'm just cheap and don't want to throw it out if it still works. Thanks