Joined
·
1,397 Posts
PS recomendations
For the PS - depending on the number of devices in your case ... but I would think a 400w PS should be fine.
You'll need to take some care to find one that is compatible. If you have a newer PC, it should be ATX - but if you're a newbie/novice, you might ask someone just to make sure. The connectors are different to the MoBo on older PC's (motherboard). Also, the holes through the case on the back and the screw locations might not be standardized if it's not an ATX (standard now) case.
You can get a lot of PS'online and they should be fine if you go with a reputable dealer and get a NEW one.
If in doubt, take it to your local PC shop and tell them you want to upgrade your PS.
Hope this helps!
For the PS - depending on the number of devices in your case ... but I would think a 400w PS should be fine.
You'll need to take some care to find one that is compatible. If you have a newer PC, it should be ATX - but if you're a newbie/novice, you might ask someone just to make sure. The connectors are different to the MoBo on older PC's (motherboard). Also, the holes through the case on the back and the screw locations might not be standardized if it's not an ATX (standard now) case.
You can get a lot of PS'online and they should be fine if you go with a reputable dealer and get a NEW one.
If in doubt, take it to your local PC shop and tell them you want to upgrade your PS.
Hope this helps!
