Tech Support Forum banner

Pocket PC Network Help

1198 Views 5 Replies 3 Participants Last post by  Erudit
I don't know if anyone here can help me but, I have an HP iPAQ 1945 and a SanDisk Wi-Fi SD Card and I can't (or could ever) connect to the internet through my router. I have a Linksys BEFW11S4 Wireless-Broadband Router. On my PDA I can see the linksys router and try to connect to it but I can't figure out how to get onto the internet. Can anyone help? Thanks

-Matt
Status
Not open for further replies.
1 - 6 of 6 Posts
Im not sure, I can't find the cd that came with the router or where to download the software to install on the computer (the router is Linksys BEFW11S4 Version 4). I'm guessing that everything is still on their default settings.
Are you running the sandisk software on the ce device?
Yes, the linksys network even shows up but I can't connect to it, which is why I think theres a security setting or something that needs to be changed.
Have you tried to access the router through IE?

Go to command prompt and type ipconfig/all and locate your gateway IPfrom a standard PC.

Type http://<gateway IP> and it "should" bring up the linksys setup page. You may be prompted for the username & password. I think from memory the username is "admin" and the password is blank.

Check to see if WEP is turned on in the linksys router and write the WEP key down and enter it onto your IPAQ in the wireless security settings.
1 - 6 of 6 Posts
Status
Not open for further replies.
Top