Tech Support Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi there,

I'm lost in the midst of the internet looking for help and a Google search pointed me in your direction, so I hope this isn't the wrong place!

Basically, I work for a company where we make products, but prior to launch, we create "mock ups" of these products to demonstrate them. So before doing a full production and paying for the minimum order of a several thousand run of boxes we have to either make them up ourselves or pay an extortionate amount for someone to do it for us.

When we try and print in-house (we have a decent printer) we can never seem to find the right paper in order to not have the print either smudge or the colour to come out off. It all appears fine on regular paper, but we want to print on a nicer quality paper as this looks a lot better when we pay for it, so want to do it in-house if we can.

The boxes normally include a photographic as well as graphics made by a designer. While this is not one of our products, the following is the sort of thing we are after:

http://2.bp.blogspot.com/_ugHoRq_8F...jd0wjtv3zWw/s1600/lucky-charms-cereal-box.jpg

Could anyone possibly shed any light on this please? We use a high quality Konica Minolta Printer, but are looking at getting a new printer specifically for this (PixmaMG6150, 12.5 ipm (mono) / up to 9.3 ipm (colour), 9600 x 2400 dpi (colour). Does anyone have any idea if this would be a good printer? Or what I would require if not? We're trying to avoid breaking the bank if we can! Thank you.
 

·
TSF - Enthusiast
Joined
·
7,670 Posts
I do not have any ideas for you on a printer model, but I have another thought for you. Photo Inkjet paper. It should give you the high quality graphics you need without smearing. Should be reasonably inexpensive for a small run - probably a dollar or so per 8 1/2 X 11
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top