Tech Support banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter #1
I was wondering if anyone could help me out. I've just finished putting my computer together, I've installed my OS (XP Pro) and it works fine but every time I boot the system it says my BIOS is not installed. I've done everything the MOBO manual says to do with no avail. I can get my bios to flash but when I reboot it doesn't stay.

My specs are:
Asus P4C800 deluxe
P4 3.06Ghz
120GB WD hard drive
2X 512MB DDR 400 ram
Radeon 9800 pro
Audigy 2 platinum
generic cd/rw
generic floppy


Is there maybe some jumper setting that I'm not doing or something? Any help on this would be great
 
S

·
Guest
Joined
·
0 Posts
Hello and welcome to the forums jwilk.................:D

Did you get the latest bios upgrade at the Asus Website?
 

·
Registered
Joined
·
22 Posts
Discussion Starter #3
Yes, I went to the Asus website and downloaded it but it also will not work. But I did notice that through XP it has my bios as being there(1006) but when I boot up it says bios not installed. could it be after I flash the bios and reboot that I'm not rebooting correctly? I don't know the command to reboot other than ctrl-alt-del.
One other thing, when I wired my mobo I intentionally left the speaker wire off, I have a sound card installed so do I still need that wire on? because my mobo guide says that any problems with the bios it will beep. Will I still here the beeps without the wire connected?
 

·
Registered
Joined
·
30 Posts
I think what you see is the BIOS for your SATA is not installed because you have no SATA drives attached.
Don't worry about it!
 

·
Registered
Joined
·
1 Posts
I have same problem. My configuration :

Asus P4C800 Deluxe intel 875 cipset
P4 2.8 800 FSB
512 DDR 400 ram
MSI FX5200 128 ram video
Audigy2 platinium audio

My OS : Win98SE

I tried same way but there is no solution....
Can any one help us for this problem...
 

·
Registered
Joined
·
30 Posts
Go to your Bios, Advanced Menu, Onboard Devices Configuration, and DISABLE Onboard Promise Controller.
And no, you won't hear the beeps without the case speaker hooked up.:winkgrin:
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top