Tech Support Forum banner

onboard video [Graphics]

598 Views 9 Replies 5 Participants Last post by  Tyree
Hello, as my previous topic when offtopic about disabling the video card thats onboard I decided to start a new fresh one :).

I' just installed a 5750 and I want to disable my 3200 from the bios not from windows as i've already done that through device manager.

Here are some pictures of the bios where i think it could be located.
If you need more pictures please do ask and i will provide them asap.

http://img20.imageshack.us/img20/9064/dsc00577xg.jpg
http://img339.imageshack.us/img339/7735/dsc00578hr.jpg
http://img818.imageshack.us/img818/2562/dsc00579.jpg
http://img130.imageshack.us/img130/7500/dsc00580r.jpg
http://img818.imageshack.us/img818/6818/dsc00582b.jpg
Status
Not open for further replies.
1 - 10 of 10 Posts
If the graphics work using the new 5770? you don't need to do anything else. Most modern Mob's recognize a dedicated GPU when it is installed.
If the graphics work using the new 5770? you don't need to do anything else. Most modern Mob's recognize a dedicated GPU when it is installed.
oh Okay, so I tried to uninstall it from the device manager and it just installed itself again on reboot.

Whenever i click scan for hardware changes it'll install itself again even though i click delete drivers. :[.

I need it turned off from bios. Please do help if you can
why don't you just select disable device in the device manager as you said you did? wasn't that enough? in the bios i could be wrong you could set that to Agp or pci if u use those and omit onboard...let me try dat and see if it works but in my present rig the agp overrides the onboard graphics.
well go into the bios and turn it off.
You were advised in the previous thread. (Post #8)

http://www.techsupportforum.com/f15/disable-onboard-gpu-493749.html

In your pictures it is already set to PCI-e to be the primary graphics.
But is it disabled? as If i click Scan for new hardware in the Device manager it'll just install itself again.
if you disable it in the BIOS thats the bit before windows loads and save the settings then windows wont detect it.
if you disable it in the BIOS thats the bit before windows loads and save the settings then windows wont detect it.
yes i know that thats why im asking how as i cant find it.
If the 5770 is being used then the Onboard is NOT active.
1 - 10 of 10 Posts
Status
Not open for further replies.
Top