Tech Support banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
After installing my new graphics card (ATI Radeon X700 PRO) into the PCI Express slot, my onboard graphics adapter was automatically disabled. This caused the attached component and S-video inputs on the front of the case to be disabled as well. The onboard card dosent appear in the hardware list. I also looked in the BIOs and can't seem to find a way to enable the factory video adapter. One of the reasons I bought the computer was to be able to have the video inputs. Is there a way to enable the adapter and the imputs?

My BIOs and drivers are all current.

3ghz Pentium 4 HT
ASUSTeK Computer INC. PTGD2-VX Rev 1.xx mobo
512mb 400mhz DDR
 

·
Registered
Joined
·
209 Posts
figure out what the front imputs go to. if they go to the motherboard see if its possible to send them to the video card. it probably isnt... i dont know if it can operate through an x700, video cards usually only run there own plugs. but im preety sure an x700 has an svideo... could you explain abit better
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top