Tech Support banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Please save all work in progress. windows is shutting down in 00:59 seconds NT AUTHORITY\SYSTEM. i cant remmber the exact message but it does this often and its very annoying is there any way at all to get rid of it OMFG IT JUST DID IT JUST NOW
 

·
Registered
Joined
·
2 Posts
Sorry I can't offer a solution to this, I had exactly the same
problem last night on my home PC. I logged on about 10 times
and the same thing happened again and again. I didn't have a
chance to try and resovle it. No doubt you have done a search
for this!? Nothing really concrete comes up. Please see following
which I have pasted from a site, it is a little different but it may
help, I can't try it until I get home.

.....................................................................................................

The system is shutting down. Please save all work in progress and log off. Any unsaved changes will be lost. This shutdown was initiated by NT AUTHORITY\SYSTEM.

The system process C:\WINNT\SYSTEM32\SERVICES.EXE terminated unexpectedly with status code 128. The system will shut down and restart.

This behavior will occur if the HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Lanmanserver\Shares registry key contains references to non-shared objects.

To fix this problem:

01. Restart your computer.

02. Press F8 when the Please select the operating system to start message is displayed.

03. Select Safe Mode on the Windows Advanced Options menu.

04. If you have multiple operating systems, select the instance of Windows 2000 that has the damaged registry key.

05. Use Regedit.exe to navigate to:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\Shares.

06. Press Export Registry File on the Registry menu.

07. Type Save_Shares into the File name box and press Save so that you have a backup.

08. For every Value Name in the right-hand pane, make sure that the Path= value is a valid, existing, shared object, either printer or folder. If the Path= value is not valid, delete the Value Name for this REG_MULTI_SZ data type.

09. Exit the Registry Editor.

10. Restart your computer normally.
 

·
Registered
Joined
·
1 Posts
Can be a hardware problem

I had this problem. I opened the box and noted that during boot, the fan noises varied (dipped and raced) more than I'd ever heard them before... enough to make it pretty obvious. I couldn't even get a full boot.

I replaced the power supply (main case atx supply) and the problem completely evaporated.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top