Tech Support Forum banner
1 - 2 of 2 Posts

· Registered
1 Posts
Discussion Starter · #1 ·

I recently setup a new pc and once it was up and running decided to install the drivers (which in turn led me to downloaded the latest bios file.
I performed the following steps for all of those drivers (except bios)
  1. Download all folders to desktop
  2. Unzip those
  3. Open them and run the setup programme
For the bios I basically followed the steps shown in this link [Motherboard] How to use USB BIOS FlashBack™? | Official Support | ASUS Global
  1. Opened the unzipped folder
  2. Renamed the bios
  3. Copied it to a usb
  4. Turned off pc and inserted usb to the bios slot on the back of motherboard.
  5. Pressed and held the bios button on back of motherboard until it started flashing.
  6. Waited for flashing to finish, removed the usb and turned on pc.

After this I waited for the PC to load however it never seemed to load into the bios and eventually just booted up to windows.
I subsequently have tried entering the bios so that I can change my ram frequency but it doesn't seem to let me and boots me back to windows (my hunch is that it could be caused by some updates I may have performed as intially when first loading before updates I could access the bios through UEFI Firmware Settings).

Can someone tell me what could be wrong and how I can fix it?

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.