Tech Support Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
TSF Team, Emeritus
Joined
·
54,253 Posts
and welcome to the Forum

Did you power cycle everything when you put the new modem in?

Turn off the Modem, router and all pc's . . turn on the Modem and wait a few minutes for the lights to stabilize . . then turn on the router, then one pc at a time. See if you connect to the internet then.

If not, Download and run this Xirrus Wi-Fi Inspector, click the Networks link on the upper left and paste a screen shot of that screen here. Note that this application requires NET Framework to run. If you get an error about a missing function, download and install NET Framework.


To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file. To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top