Tech Support banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
Ive just put together my new system:

Antec 900 Case
Asus P5k
512MB 8800GT
Corsair HX 620W
OCZ 2x1GB 800Mhz PC6400
500GB HDD

When I power up there is no video...

I have tried using both PCI-E slots on the MOBO
One single PCI-E power cable to the PSU
PCI-E to 2 Molex connectors connected to the PSU

Any Ideas?
 

·
Registered
Joined
·
1,690 Posts
Try checking the display settings in the BIOS, or hit delete while booting it will take you there. While in there hit control+F1 at the same time then find the display settings..............
Also what CPU are you using? Is the extra power pluged into the video card?
Is the CPU power plug on the mainboard pluged in?
 

·
Registered
Joined
·
16 Posts
Discussion Starter #3
Can't get into the bios becuase nothing is displayed on screen at all both monitors give the no signal response

CPU power plug? Im assuming you mean the 3 pin connector from the heatsink and fan? If so, yes that is connected

I have tried

- Both PCI-E slots on the motherboard
- 6pin (PCI-E) to 6Pin connector to power the GPU
- 6pin (split) to 2 Molex connections to the PSU
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top