Tech Support Forum banner
1 - 3 of 3 Posts

· Registered
256 Posts
Discussion Starter · #1 ·
I've had my PC for about 10 years and as of today when i boot it up, i get 'No Signal' on the monitor and it just stays like that. This PC does not have it's own dedicated video card so i just use the on board ports.

Motherboard - Gigabyte GA-A75-UD4
CPU - AMD A4-3400 APU
RAM - 2 x CRUCIAL 2GB PC3-10600 DDR3-1333

Things i have tried -
  • Using different cables (VGA and HDMI)
  • Using different monitors (VGA and HDMI)
  • Cleaning the RAM (this was a suggestion i found online)
  • Installing different RAM sticks
  • Installing a dedicated video card that i know works
  • Installing a different power supply that i know works
After all of the above failed to get me a signal. I suspect the motherboard has failed however, all fans plugged into it seem to be working. I also plugged a USB stick into the back of it (one with a light on it) and it lit up fine, which means that it could be working. So could this be a motherboard issue? Could it have something to do with the CPU?

1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.