Tech Support banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have a X533 Mobo with a celeron processor, 256 of ram, tape drive attacted to an SCSI card, and a video card from when I changed my vid. card in my other comp. I have no hard drive yet. I can start it up, but I get no display. The monitor is working, and I've reset my BIOS. Can anyone help?
 

·
Registered
Joined
·
5 Posts
Look pal, put in a harddrive first and then try it again. You need to mark down your errors on a trial and error basis!
 

·
hey
Joined
·
10,189 Posts
By your post I am asuming that you have no picture from your video card, correct? If so take it down the basics. Video card, memory, motherboard and power. See if you get a picture. If not, chances are on of those is bad. Start replacing on at a time until you come across it. If you do get a picture, start adding things one by one.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top