Tech Support banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
60 Posts
Discussion Starter #1
Hello! Lately I've discovered that my PC is freezing.
When it happends I gotta reboot the computer, because the whole system locks...

I'm not good with computers so if you help me, please tell me exactly what to do so I dont do wrong...

Some specs:

OS: XP Proffesional SP3

Processor: 3,40 gigahertz Intel Pentium 4
16 kilobyte primary memory cache
2048 kilobyte secondary memory cache

Drives: 160,03 Gigabytes Usable Hard Drive Capacity
23,46 Gigabytes Hard Drive Free Space

HL-DT-ST DVD+-RW GSA-H21L [CD-ROM drive]
UHK KL6RC5MB8 SCSI CdRom Device [CD-ROM drive]
UHK KL6RC5MB8 SCSI CdRom Device [CD-ROM drive]

Generic- Compact Flash USB Device [Hard drive] -- drive 1
Generic- MS/MS-Pro USB Device [Hard drive] -- drive 4
Generic- SD/MMC USB Device [Hard drive] -- drive 3
Generic- SM/xD-Picture USB Device [Hard drive] -- drive 2
WDC WD1600JS-60MHB5 [Hard drive] (160,04 GB) -- drive 0

System Model:Hewlett-Packard HP Compaq dx2200 MT
System Serial Number: HUB713193S
Asset Tag: HUB713193S
Enclosure Type: Desktop

Main circuit board: Board: MSI 0A48
Bus Clock: 200 megahertz
BIOS: Phoenix Technologies, LTD MS7254 1.08 03/08/2007

Display: NVIDIA GeForce 8600 GT [Display adapter]
HP L1906 [Monitor] (19,1"vis, s/n CND7062JG7, februari 2007)

Memory Modules: 2048 Megabytes Installed Memory

Slot 'A0' has 1024 MB
Slot 'A1' has 1024 MB

Local Drive Volumes: c: (NTFS on drive 0) 160,03 GB 23,46 GB free

Please help me! It's very annoying :/
 

·
Registered
Joined
·
60 Posts
Discussion Starter #3
Vcore: 1.17V
+12V: 12.14V
AVcc: 3.31V

GPU: 56C
System: 36C
CPU: 42C
AUX: 46C
HD0: 38C
Core: 56C
Ambient: 0C


And this is while the computer is not running any games, except some small programs
 

·
TSF Team Emeritus
Joined
·
9,471 Posts
Everything there seems ok although we may do more with temps and voltages if this next test don't show anything.

Download memtest, either the floppy version if you have a floppy drive or the cd version, you make a bootable cd or floppy then boot from it to test the ram.

http://shsc.info/Memtest86

You should test one stick at a time so you will have to remove one stick of ram test the one that remains then install the other one while removing the first.

Let memtest run a good 8 hours unless it shows errors if it does stop the test and test the remaining stick. Any errors and you found your problem
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top