Tech Support banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
I just recently bought an ATX computer case and I transfered all my computer insides from my old ATX case, to the new one. The fans on the computer on's, I can also hear the hard drive going on too. I don't hear the usual beep from the computer when you on it, and nothing shows up on my monitor. I think it has something to so with my button board on my motherboard. I read my motherboard manual and installed it correctly, but still, i got nothing!
 

·
Premium Member
Joined
·
78,003 Posts
reset the cmos and see if it posts
recheck you have connected the case and reset wires correctly at the m/b
 

·
Premium Member
Joined
·
78,003 Posts
set it up out of the case where you can get a good look at everything,with
cpu
video
ram
leave the power button and reset ect disconnected and start it by touching the 2 pins on the m/b that the case switch connects to with a paper clip or something similar
 

·
Registered
Joined
·
9 Posts
Discussion Starter #6
Nevermind, I called my cousin, cos he deals with comps and knows how to build them. He fixed it. I thought I'd try to fix it and learn on my own. But got frustrated and turned it over to him. Thanks everyone for your help!
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top