Tech Support Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

· Registered
Joined
·
17 Posts
Discussion Starter · #1 ·
Hello !

I have a MOBO(ASrock anniverasry z97) with a 8 pin power. My cpu is a i5-4460.My PSU has only a 4 pin power connector .I want to buy a double molex to 4+4 pin connector , altough the PSU only has one cable with multiple molex connectors.Will that be a big issue ?I also managed to power the PC with only the 4 pin connector but from what i've read , it's not that safe.
 

· TSF Emeritus
Joined
·
26,674 Posts
Hi, welcome to TSF

What's the make/model of the PSU and graphics card?

If the PSU doesn't have the right connectors for your graphics card, it's probably not strong enough and should be upgraded.
 

· Registered
Joined
·
17 Posts
Discussion Starter · #3 ·
Floston FL650 EXTRA 650W this is the PSU. It has a 6 pin connector for the graphic card so there is no problem there. The graphic card is an Asus 950 GTX STRIX.From whati read on the MOBO manual it says if i want to use a 4 pin connector i shoul put it alongside the pin 1 and 5 .
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top