Tech Support Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
needing to find the AT commands for a Agere modem driver ver 2.1.87.0…to change compression by hardware – right now have settings with common commmand ATFX to combine fast speed command. need this asap. it’s MS+ something…I need the command string to for manual compression by 2-10% on dial up. Is there software just for hardware compression? Also, does anyone know the best software for dial up speed increases? enough so bandwidth doesn't choke at 56kb or if you know of any software solutions similar to channelized isdn on dial up modems at this time.
 

·
TSF Enthusiast
Joined
·
1,153 Posts
Hi and welcome!

I would suggest trying this search to see if it returns something you can use.

http://www.google.com/search?hl=en&source=hp&q=Agere+modem+AT+commands&aq=f&oq=&aqi=g1

Also, here is a link to "some" Agere modem commands

http://74.125.93.132/search?q=cache...re+modem+AT+commands&cd=1&hl=en&ct=clnk&gl=us

I do not know of any software and I do not believe it is physically possible to use the so called "Channel Bundling" feature of ISDN on a POTS dial up connection. ISDN uses channels, but POTS is just what it says... one connection only.
 

·
Registered
Joined
·
18,118 Posts
ISDN is actually considered broadband while dial-up is narrowband. Don't expect more than 53Kbps realized. And considering how most Net data is compressed you won't gain much speed.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top