Tech Support Forum banner

Mobo & SSD Compatability?

34 views 2 replies 3 participants last post by  MPR  
* Background Information *

The drive seems legit. https://www.originstorage.com/stora...ives/m-2/client/nvme/origin-storage-otlc1tb3dnvmem-2-80/?utm_source=chatgpt.com

Reasons OEMs Enable "RAID" by Default
  1. Wider driver support during installation
  2. Corporate / enterprise image management
  3. BitLocker and security features
So that seems legit too.

* POSSIBLE FIXES *

Since your system is unstable, I'd try these in the order listed.

Adjust Power Options
  • Open Power Options: Go to Control Panel > Power Options > Change plan settings > Change advanced power settings.
  • under "PCI Express," set "Link State Power Management" to "Off".
Check BIOS Settings

Upon startup start tapping F2 to enter the BIOS
  • Set Controller Mode: Ensure your storage controller mode is set to AHCI instead of RAID.
Check Disk Integrity
  • Run CHKDSK: Right-click Start, open Terminal (Admin) and enter chkdsk /r <-- this will require a re-boot to run
Re-install the SATA RAID/AHCI drivers.