Tech Support Forum banner
Status
Not open for further replies.
1 - 9 of 9 Posts

· Registered
Joined
·
49 Posts
Discussion Starter · #1 ·
Hi;
I have a Mikuni carb on a 5hp Kawasaki engine that requires a new gasket on the intake manifold side, the carburetor face has a small hole in it and I'm wondering if the gasket can cover this hole or should it be left open?
Thanks.
 

Attachments

· Registered
Joined
·
729 Posts
You left off the 4 character Alpha-nurmber that is the spec number for FA210D. There only about 30 different specs for the engine series. but as now it appears that there is no need for the vent port.

I also use a different vendor than SearsPartsDirect and they maybe still be able to get carburetor from Kawasaki just depends on the spec number.
 

· Registered
Joined
·
49 Posts
Discussion Starter · #5 ·
The carb itself is fine, I made new gaskets but I don't know what that little hole is or if it can be covered over with the gasket.
It's on the engine side and close to the air screw.
I'm just trying to find out what the purpose for that hole is and if I can cover it with a new gasket.
I tried contacting Mikuni twice but not getting a response.
 

· Registered
Joined
·
729 Posts
That why I needing that spec number so I look-up the correct gasket and take look at it. That port may not even be used with your current set-up. I even work some 2 cycle that the impulse port are not even but are still there because carburetor are used on multiple applications.

As contacting the carburetor manufacture is most likely you will not respond as they usually only deal with the OEMs and not the end user.

If you prefer to look-up the gasket yourself you will need the complete engine number. The following site has most the Kawasaki engine IPLs except for those that are JD spec.

Lawn Mower Parts | Small Engine Parts - Jacks Small Engines
 

· Registered
Joined
·
729 Posts
John Deere Kawasaki Engine. Not even able to pull up the IPL so JD Parts would need to look-up that one manually.

Sorry can't be of further help on this.
 
1 - 9 of 9 Posts
Status
Not open for further replies.
Top