Tech Support banner

Status
Not open for further replies.
1 - 12 of 12 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1 (Edited)
Using AIDA32 I have this information:

Motherboard Properties
Motherboard ID 12/31/2003-i845G-W627-6A69VM4YC-00
Motherboard Name Unknown

Front Side Bus Properties
Bus Type Intel NetBurst
Bus Width 64-bit
Real Clock 100 MHz (QDR)
Effective Clock 400 MHz
Bandwidth 3200 MB/s

Memory Bus Properties
Bus Type DDR SDRAM
Bus Width 64-bit
Real Clock 133 MHz (DDR)
Effective Clock 267 MHz
Bandwidth 2133 MB/s


Chipset Bus Properties
Bus Type Intel Hub Interface
Bus Width 8-bit
Real Clock 67 MHz (QDR)
Effective Clock 267 MHz
Bandwidth 267 MB/s

I think that I understand, but just to be sure: what memory should I purchase? (try to be fairly specific...)
 

·
Registered
Joined
·
5 Posts
Discussion Starter #3 (Edited)
HP Intel Pentium 4A, 2600 MHz... it has convinced me never to buy a computer from the convential store again ;)
It already has 512 MB (PC2700 DDR SDRAM), but I've had trouble with memory in the past and I'm playing it safe.
 

·
Registered
Joined
·
5 Posts
Discussion Starter #7 (Edited)
No there isn't an AGP slot... it has a basic onboard video card and a PCI video card that I put in...
edit: ms-6577... yes it is, version 4.1?
edit2: I am an idiot, that is my motherboard there.
 

·
Registered
Joined
·
2,163 Posts
Most Likely will not work together. you can try it but do not be disapointed if it fails. You are best off using the same type that is in there now. If that board Is an MSI board then they can be real fussy about memory. :4-dontkno
 

·
Registered
Joined
·
2,290 Posts
Download and install Check My Computer and it will tell you a lot about your memory needs.

Check My Computer

These guys sell direct and are major OEM memory suppliers.

Pretty good prices as well!

JamesO
 
1 - 12 of 12 Posts
Status
Not open for further replies.
Top