Tech Support banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter #1
Hello all,
I am trying to install Win98se on my new drive which is listed above. I have tried about 4 times already without any success, the installation process simply freezes.
Can it be due to a limitation that Win98se has with ATA133 drives? Maybe the 8MB buffer in the drive makes these problems?
The installation processof Win98se reports a problem in the HDD's sectors but that cannot be because I installed WinXp Pro without any problems whatsoever...
Thanks,
LIOR
 

·
Registered
Joined
·
336 Posts
do you have the 1st boot drive set correctly in BIOS...either floppy if you are using a boot disk or CDROM?
 

·
Registered
Joined
·
13 Posts
Discussion Starter #3
Problems solved

First the floppy was not connected well to the mobo, so I flipped the cable's alignment...
Second I had to configure some things in the Bios to make Win98se work with it, so now I am Presto...
Thank-goodness...:tongue2:

LIOR
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top