Tech Support Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
224 Posts
Discussion Starter · #1 ·
Evening all.

Turned the pc on today and I have lost all sound. My PC is connected via the speaker out from the back of it which goes into 2 phono leads into my stereo. The stereo is set on the AUX/D-IN mode to receive it. I was playing music last night and that was the last time it worked. Today the stereo is just flashing "No Signal D-IN" and I have no sound.

Any sugestions. Ihave checked the cabling and it is in correctly.

Mark
 

·
Registered
Joined
·
224 Posts
Discussion Starter · #3 ·
It has AC97 onboard sound. Come to think of it this happened a few months ago and I had to re-install the sound drivers. If it happens agin then I've obviously got some issues. What do you think it could be?
 

·
Registered
Joined
·
224 Posts
Discussion Starter · #5 ·
What a tit! It was just me.

On my stereo if you push the AUX/D-IN button again it changes it to D-IN. D-IN and AUX are two seperate inputs obviously!!!! So I pushed it again and it went to AUX and nows it's working!

You live and learn!

Thanx for your help anyway.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top