Tech Support banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi there,
I'm trying to set up a wireless network. I have my roomates pc hooked up into a lynkys router. It says on my computer that its connected and signal strength is excellent. The problem is that I dont a valid Ip address and It won't let me renew it. Any help would be great!
 

·
Registered
Joined
·
60 Posts
i need to things from you, your room mate's comp ip, and yours. if they differ, then we need to either change your desktop settings to get an address automatically or if that's already done... change the dhcp settings of the router... however that shouldn't be the case.
 

·
Citizen of the world
Joined
·
51,042 Posts
Please supply the following info, exact make and models of the equipment please.

What country are you located in.
Name of your ISP (Internet Service Provider).
What is the expected Upstream/Downstream speed for your ISP Connection?
Make and exact model of the broadband modem.
Make and exact model and hardware version of the router (if a separate unit).
Model numbers can usually be obtained from the label on the device.
Connection type, wired or wireless.
If wireless, encryption used, (none, WEP, WPA, or WPA2)
Make and model of your computer.
Version and patch level of Windows on all affected machines, i.e. XP-Home (or XP-Pro), SP1-SP2, Vista, etc.
The Internet Browser in use, IE, Firefox, Opera, etc.




Please give an exact description of your problem symptoms, including the exact text of any error messages.

If you're using a wireless connection, have you tried a direct connection with a cable to see if that changes the symptoms?

If there are other computers on the same network, are they experiencing the same issue, or do they function normally?




On any affected computer, I'd also like to see this:

Hold the Windows key and press R, then type CMD to open a command prompt:

Type the following commands:

PING 216.109.112.135

PING yahoo.com

NBTSTAT -n

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top