Tech Support banner

Status
Not open for further replies.
1 - 9 of 9 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
i am at wits end i have a kt3 ultra 2 mobo , 512 2700 ddram, g4 4200 64, audigy card, linsys nic. all was running well till yesterday when i would sign in and get a black screen. well clearing the cmos was the only way to get it to boot. noww clearing the cmos wont work what can i do???

Thanks
also i seem to be getting 3 beeps when starting. And no I never overclocked.
 

·
Premium Member
Joined
·
598 Posts
Hi. Welcome to the forum.

The 3 beeps you hear, are they long or short beeps?
 

·
Premium Member
Joined
·
598 Posts
Try this:

Open your case and reseat everything including ribbon and power cables, memory sticks, pci cards.
 

·
Registered
Joined
·
6 Posts
Discussion Starter #6
well I removed all the connectors and totally reinstalled everything noww I get no beeps but it hangs on the testing vga bios according to the lights on the connector on the rear.

it will not boot to cmos either!!!! geeze this sucks.
 

·
Registered
Joined
·
6 Posts
Discussion Starter #8
Speedo the ram has been in all three slots no go...btw its a single 512 2700 ddr.

any other suggestions are more than welcome
 
1 - 9 of 9 Posts
Status
Not open for further replies.
Top